Related topics

freebsd-performance Digest, Vol 60, Issue 15
Brett, possibly quick test for you: install a different disk controller in the the 1750 -- any controller at all that isn't based on the LSI Logic 1030 or It also made it impossible to use Sun x4100 boxes as there's no way to upgrade from the onboard SCSI controller. I've seen checkins to the mpt driver in the

Does 2.0 support SCSI non-active drives?
What's worse is that it would be impossible to determine, in advance, whether E-Mail was going to be delivered over purely secure SSL links or could be ..... Would it make sense to install an SCSI CD-RW and a SCSI CD-R, and use an IDE hard disk? BTW, system is for personal use at home - which means from 10:00 pm to

For anyone still watching this thread - problem identified
After installation it was impossible to reach the SCSI-Disk because it was not possible to get a modular kernel and ramdisk out off the install Disk onto the harddisk. mount scsi disk and run lilo. Confused? Why not ... it took me 2 days to get a working Linux system in this way. regards Christian.

Mirror IDE Drives with Disksuite?
dkagle@PROBLEM_WITH_INEWS_GATEWAY_FILE comp unix unixware Will version 2.0 support installation on a machine with both IDE and SCSI where IDE is the only drive recognized by the system bios. Otherwise when installing 1.1 it insists on installing on the active drive(IDE). This makes it impossible to install on the

Frequently Asked Questions Post (2/2)
I then get a screen full of crap like this :) Installation of software from distribution media will now begin Double fault in system mode: cr0 0x8001001B cr2 0xDFFFEFF8 cr3 0x00002000 tlb 0x00000000 The CR2 value shows that the kernel stack overflowed. The 0 value in EIP makes it impossible to investigate any

Drivers for Scanner Relisys AVEC II S3 for Win2000
Also, I have tried to install "SCSI adaptors" using the Selective Install menu in OS/2 (after trying, unsuccessfully, the installation with the SCSI card own I believe the problem may be in the order of the PCMCIA and SCSI statements, but the documentation is very limited, and the phone calls impossible.

Windows 64 XP PRO & ACPI Drivers
I've only called tech support once to asked how to install SCSI switch wires from an external SCSI case enclosure to my internal Plextor drives and I got a quick response. I do not know what model of Plextor you have. It sounds impossible to get all bad replacements unless there is something wrong with your system

fr.comp.os.msdos
(GS only) * If you boot up and only 1 partition shows up, you need to install the SCSI drivers. (GS only) * If you boot up and it says "Drive XXX is already on the desktop" over and over: Probably a SCSI ID problem. (GS only) * If you add a CD-ROM, drivers are availiable from Trantor Systems LTD, 5415 Randall Place

Does 2.0 support SCSI non-active drives?
Ilustrator imported this file and printed it correctly but, of course, only showed a box placement and no image on the screen, and it was impossible to re-size .... Briefly this is what I told them _I_ wanted: (1) I wanted to have 1 copy of the utility programs on floppy, (2) the right to install SCSI drivers on X

AHA 2940UW external pluging problem
This of course isn't painless, since Win2000 must install system-files to the primary drive reported by BIOS so this makes it impossible to install on the SCSI-drive. I've changed dozen of settings in the BIOS, always with the same result. Computer hangs (freezes totally) during Win2000 cd-rom boot if SCSI-drive is

Restore NT on different hardware
The latter features a connector on which the SCSI-module is placed. It is simply impossible to connect the two in a wrong way (especially with a 68040-based Since I intended to remove all IDE drives from my system, I simply used the system's LED. However, I have seen various documents on how to install a

Computer is running. Questions, Suggestions, & Summary
If you have one of the latter boards and wish to install from a SCSI-based CD-ROM, you will need to acquire the appropriate SCSI driver and add it to the OS/2 The best way to utilize both OS/2 and DOS on a system with such a hard drive is to partition the drive with OS/2's FDISK such that OS/2's Boot Manager,

REVIEW: CyberSCSI Mk II
GMT FDIV020 [1995/04/09] bin/329 FTP transfers above 99K shown in scientific notation [1995/04/11] kern/336 make world fails on NCR-SCSI machine [1995/04/14] disk errors during installation/newfs [1995/06/01] misc/469 ctm leaves temp files after errors [1995/06/01] kern/471 System can not access SCSI DAT tape.

????Binaries????
EDU comp unix unixware Will version 2.0 support installation on a machine with both IDE and SCSI where IDE is the only drive recognized by the system bios. Otherwise when installing 1.1 it insists on installing on the active drive(IDE). This makes it impossible to install on the SCSI drive.

Plextor sucks.
There are PC Mother Boards that have built in Ethernet and SCSI. . . check out ASUS. On those machines (obviously) you do not have to install a SCSI card first. Actually, I have two external SCSI drives connected (daisy chained) to my system: an old 500 meg drive that uses a Centronic connection,

comp.sys.apple2 FAQ 2/2
Even more unfortunate is the fact that if ACPI support isn't determined at the initial install it's virtually impossible to correct this at a later time short of to install XP, the first thing you'll see at the bottom of the screen is the option to press F6 if you need to install a SCSI or RAID controller.

Frequently Asked Questions (FAQ) for csa2 Part 4/4
Install the SCSI drivers from your GS/OS disk, not your HS Apple SCSI disk. 8.6 Why does my Apple II lose characters when I'm using the modem? One system crash that happened out of the blue and never reoccurred is almost impossible to track down and fix. 2. When did the fault appear? During boot?

Splitting large files for floppy transport
OS/2 Since MS are no-longer going to support W9x why install a defunct operating system. 9x? isnt that a phone company bell atlantic bought They are still You need to install a SCSI driver in my case and configure it with the CD ROM driver. Even with IDE drives you still had to have a CD ROM boot disk.

freebsd-usb Digest, Vol 172, Issue 1
OS X won't install with a SCSI adapter? How can others pretend it is a "server" if SCSI won't work? Or, is this a way to convince you to spring for OS X Server? Joe doesn't know much about Macs, except that you have to "bless" system folders in OS9 and previous OSs. In reality, the performance of a Mac is

How to? OS/2, IBM (Future Domain) SCSI card, Microtech 1Gb ...
Hopefully, that will move your system partition to the SCSI drive and allow you to boot into your original W2K install. .... There is no such thing as an NTFS boot disk since it's impossible to format a floppy NTFS. I would boot into W2K w/ your floppy and Disk Management to make sure that there is a system